Couldn't load pickup availability
The ZUGO RHINO Replace Display is the perfect replacement for the ZUGO RHINO or ZUGO RHINO STEP-THROUGH. Offering an easy-to-use interface and high-quality visuals, you can trust the ZUGO RHINO Replace Display to give you a clear display at all times.
Production time: 15 days
ZUGO BIKE Original Display, Limited Quantity.
ZUGO RHINO Display Error Code (ZUGO Bike Troubleshooting)
There will be error code shown on the display while the system doesn’t work.
Error code definition table | For reference only |
1. Error code0x01: | Then display is in normal condition. |
2. Error code0x03: | The ebike is braking. |
3. Error code0x04: | The throttle is no homing (staying in the hing position). |
4. Error code0x05: | Throttle is broken. |
5. Error code0x06: | Battery is under voltage protection. |
6. Error code0x07: | Overvoltage protection. |
7. Error code0x08: | Motor Holzer signal line is broken |
8. Error code0x09: | Motor phase is broken. |
9. Error code0x10: | The controller temperature is high enough to reach the protection point. |
10. Error code0x11: | The motor temperature is high enough to reach the protection point. |
11. Error code0x12: | Current sensor is broken. |
12. Error code0x13: | Battery temperature is broken. |
13. Error code0x14: | Temperature sensor in motor is broken. |
14. Error code0x15: | Temperature sensor in controller is broken. |
15. Error code0x21: | PAS is broken. |
19. Error code0x25: | Torque signal of torque sensor is failure. |
20. Error code0x26: | Speed signal of torque sensor is failure. |
21. Error code0x30: | Communication is failure. |